Concrete Repair Scheduled For Ramp On I-24 West Near Mile Marker 183

Thursday, May 15, 2014

Tennessee Department of Transportation contract crews will close the ramp on I-24 West in Hamilton County at Exit 183A (between Belvoir Avenue and Moore Road) on Thursday night, and throughout this weekend to perform concrete repair.   

Between 9 p.m. on Thursday and 6 a.m. on Friday, the contractor will have the ramp closed to saw concrete slabs in preparation for weekend concrete ramp repair.  Beginning on Friday at 10 p.m.  through Monday at 6 a.m., the contractor will have the ramp closed to perform concrete slab repair work on the ramp. 

The two left lanes of I-24 West will remain open during this work.  Traffic needing access to North Terrace Road from I-24 West will be directed to use Exit 184.  Traffic entering I-24 West from North Terrace Road will be directed to use the on ramp to I-24 West from Germantown Road.   

Caution should be used while traveling through the work zone.  During this work, THP will assist with traffic control.  Also, traffic information will be displayed on TDOT’s SmartWay Dynamic Message Signs, and several message boards will be used to provide traffic information to the public. 

This concrete repair work is being done as part of a statewide on-call concrete repair contract.  This work is weather dependent.  Should weather or unforeseen circumstances postpone this work, it will be rescheduled to take place as soon as possible.


CarFit Event For Senior Drivers Friday in Dalton

The Dalton Police Department will conduct CarFit check-ups in Dalton on Friday from 10 a.m. - 2 p.m. at the Dalton-Whitfield Senior Center, 302 Cappes St. next to the Dalton-Whitfield Library. At a CarFit event, trained volunteers complete a 12-point checklist with each driver. Among the items checked are:  correct position of driver’s seat; driver’s ability to easily ... (click for more)

CARTA’s Labor Day Schedule

In observance of Labor Day, there will be no CARTA fixed route bus service or North Shore Shuttle service on Monday.  The Downtown Shuttle will operate on a holiday schedule, beginning at 9:30 a.m. until 8:30 p.m.  The CARTA Care-a-van service will also be operating on a holiday schedule.     All CARTA bus services will resume regular weekday schedules ... (click for more)

City Sound Control Ordinance Goes Into Effect In 30 Days

A controversial Downtown Sound Control Ordinance will go into effect in 30 days after being approved by the City Council on second reading. Councilwoman Carol Berz said she believes it is a good ordinance, but not a perfect one, and that it should be under continual review for possible revisions. The ordinance itself calls for it to be examined at the end of the first year. ... (click for more)

Boy, 15, Shot In The Shoulder On Taylor Street

A 15-year-old boy was shot in the shoulder on Taylor Street on Tuesday night. At approximately 7 p.m., Chattanooga Police received a call of shots fired in the area of 3200 Taylor  and were advised at 7:22 p.m. that a person arrived at a local hospital suffering from a gunshot wound. Investigators were advised that the young black male sustained a gunshot wound to his ... (click for more)

Noise Fallout Coming Soon On Chattanooga's Flawed Sound Control Ordinance - And Response (3)

I have been practicing acoustical, audio and sound engineering for more than twenty years. Since I understand many aspects of sound, I sent the enclosed letter to the Chattanooga City Council members regarding some of my concerns on the impending noise ordinance changes. My comments were unacknowledged.     August 19, 2014 Dear Chattanooga ... (click for more)

Roy Exum: Al Sharpton’s Wise Remarks

I’ll admit I paid little more than scant attention to the Monday funeral of Michael Brown, the 18-year-old who was shot and killed by police bullets in Ferguson, Mo., after he allegedly was involved in strong-armed robbery. There are too many tawdry details and, in my way of thinking, there is nothing under God’s sun, absolutely nothing, that gives others the right to riot, burn ... (click for more)